#10/12Can Ormus resonant frequency be recorded in an audio file?
Well it seems there is Ormus in frequency available as mp3 file.. What's your thought on this Chris Emmon?
RESPONSE: Hi and OK I will do as you ask since there is helpful but generally unknown information about m state of Ormus, resonant frequency and shape of Ormus which can be shared…
…So, I followed the link and listened to the MP3 titled: “Energetic Encoding Technology that Broadcasts the Amplified Energetic Signature of Pure Monatomic Gold”. I also read the other main concepts being marketed on the page which include discussion of Monatomic Gold -which he defines as having one atom in the molecule. (Later I address this use of the term monatomic).
My response contains some technical info which requires thoughtful thinking.
The MP3
In the MP3 titled “The Amplified Energetic Signature of Monatomic Gold” an audio file is spoken of which contains the amplified signature of monatomic gold. I would like to know how the signature, the frequency, of Ormus Gold was determined -since Ormus is m state and m state is a non-physical state; a Quantum state.
From Ormus Academy Online in the article: m state at EmmonsEssentialEssence.com
“M state is a state with unseen non-physical characteristics. M state indicates anything that is simply outside of our limits to perceive directly, observe and assess; it simply is energy too small or too large for us to measure with equipment available in the third dimension space where we reside.”
Mention is made of the monatomic gold frequency being transferred to digital audio via proprietary methods. It is helpful to know that Free Audio Frequency Signal Generators do this and are available on the internet. Here is a link to one:
http://www.ringbell.co.uk/software/audio.htm
While the audio file being sold may be relaxing to listen to, it is a stretch to believe that any audio file can contain the frequency of m state in Ormus Gold because m state is a non-physical state.
The cost for this audio file; $97.00 dollars
It remains with you to determine the worth of this audio frequency file.
Resonant frequency of a physical material
Applying energy, frequency is energy, to a physical material -or to you via audio frequency entering your ears- is performed using mechanisms that increase vibration in the element –or you through your ears.
The most common frequency chosen is called a Sympathetic Resonance frequency, also known as Fundamental Frequency.
The process of applying Sympathetic Resonance frequency, uses a properly tuned signal generator which causes the physical material to resonate (vibrate) in a repeating standing wave pattern.
Since the author does not elaborate, I assume he utilizes Sympathetic Resonance frequency. There is no indication of the frequency chosen, how the choice was determined or method of its generation; ie, via sound, light, electric. I will mention that an exotic non auditory method of applying frequency is said to exist Quantumly through mobius or other coil.
The vibrational energy continues so long as the signal generator continues. While vibration of the element(s) occurs, no additional quantity of element(s) forms.
Regarding the duration of the vibration within the element, Ormus Modern Day Alchemy page 154, addresses Vedic Alchemy. This is a part of Ayruveda which comes from East India and states that externally applied vibrational frequency lasts three days.
It remains with you to determine the value of marketing this frequency audio file.
Challenges with Sympathetic Resonance frequency
The major obstacle with Sympathetic Resonance frequency is that values determined are not practical and must be mathematically altered for use. Most are not aware of this. For example, a Google search of the resonant frequency of gold yields the answer; 1.729 MHZ. Most everyone will not notice the NMR designation before the word resonant frequency and sometime the NMR is not even placed before the word resonant frequency.
Practically no person will recognize that the NMR resonant frequency is a specific value obtained under controlled (not natural) conditions. It is not the value for practical use. This is another reason we need to be advised about what frequency is used in the audio file being sold.
I will explain:
The resonance frequency of gold, properly termed Nuclear Magnetic Resonance (NMR), is 1.729 MHz. The NMR frequency for any given element is dependent on the static magnetic field the element is exposed to. (As explained earlier, remember how m state Ormus gold is non-physical and not an element.)
NMR frequencies are determined based on the same magnetic field strength that produces an NMR frequency of 100MHz for hydrogen. The standard static magnetic field strength that yields an NMR frequency of 100MHz for hydrogen is roughly 2.35 Teslas (abbreviated as T).
The NMR frequency is proportional to the magnetic field strength the material is exposed to. This is a key consideration since the NMR resonance frequency of any element varies with magnetic field strength. Most everyone however will make a Gross misstep and use the Google answer of 1.729 MHz.
Explaining why this is a misstep involves understanding that the Earth's natural magnetic field varies from place-to-place. The fair typical strength of the Earth’s natural magnetic field is considered to be 50 microTeslas (uT). 50 microteslas is 5.0×10-5 Teslas and is a whopping 47,000 times weaker than the standard static magnetic field strength of 2.35 Teslas used to determine NMR resonant frequency. Consequently, the NMR frequency of gold is 1.729MHz while at the earth’s fair typical magnetic field strength of 50uT, gold has a frequency of only 37 Hz or so.
Even folks whom I may consider would know about resonant frequency did not know about this.
Destructive Resonance Frequency
While on the topic of Resonance Frequency, you may find benefit in knowing about Destructive Resonance Frequency. Some may consider that applying Destructive Resonance Frequency during an Ormus process might release more m state from the element in the source material. This topic has never been a discussion point in the Ormus community.
Destructive resonance frequency requires two co-administered resonant frequencies: One low and one high and the higher frequency must be 11 times the lower (musicians call this the eleventh harmonic). When we enter the eleventh harmonic we begin to not only cause sympathetic vibration but one that will actually tear apart its physical shape: hence the term Destructive Resonance Frequency. The eleventh harmonic frequency has been used to destroy microorganisms and Physicists who have observed the effect have said this appears to be a new phenomenon for them.
Again though, I point to a requirement that the proper fundamental frequency is chosen.
Monatomic Ormus
The page you linked in your question addresses at length that the shape of elements in the Ormus state are monatomic. Monatomic is one atom size. However, since no one has seen an Ormus element all discussion regarding its shape is theoretical.
Initially, the belief was that Ormus is monatomic. Over time that belief fell to the background as other theories emerged. Perhaps the shape is diatomic (two atom size) formed in the shape of a dumbbell having an atom at each side of the dumbbell shape. Or perhaps the shape is multiatomic having multiple atoms.
A well traveled research alchemist explained that Ormus is probably 2 atoms, or an even number of atoms. He explains that in this manner, the Ormus is balanced which enhances its property of levitation. Levitation of the precipitate during a Wet Process of Ormus collection is regularly observed.
All discussions regarding the shape of Ormus are theoretical however the page at this link teaches that Ormus is monatomic.
It remains with you to determine the value of marketing Ormus as monatomic.
I hope the above information assists on your own personal Ormus journey.
Thank You for sharing about this Ormus Outreach and Ormus Academy online.
Chris Emmons, pharmacist, author Ormus Modern Day Alchemy
FB: Ormus-a page for beginners
EmmonsEssentialEssence.com